Updated August 12, 2026
If you are preparing Army gear for a layout, PCS, ETS, or CIF turn-in, start with your current clothing record—not a generic checklist from the internet.
TA-50 is a commonly used older term for Army-issued field gear. Current Army documentation generally refers to this equipment as Organizational Clothing and Individual Equipment (OCIE). The exact items issued to you can vary, so your clothing record and current local CIF instructions should always be your source of truth.
This guide provides a practical TA-50 gear checklist to help you organize your issued equipment, identify items that may need cleaning, remove components that should not be machine washed, and prepare washable gear before CIF turn-in.
What Is TA-50 Gear?
TA-50 generally refers to Army-issued field equipment and organizational clothing that a Soldier is responsible for while it is assigned to them.
Depending on the Soldier, unit, location, and issue history, the equipment may include categories such as:
- Rucksacks and assault packs
- Duffel and deployment bags
- Load-carrying equipment and fabric pouches
- Wet-weather and cold-weather gear
- Sleep-system components
- Protective equipment and removable fabric components
- Hydration carriers
- Other OCIE shown on the Soldier’s clothing record
There is not one universal TA-50 list that applies to every Soldier. Before cleaning or preparing anything for turn-in, compare the equipment in front of you with your current clothing record.
TA-50 Gear List: Start With Your Clothing Record
The most important part of a TA-50 checklist is accountability. Instead of trying to recreate your issue from memory, work directly from your current Army clothing record.
1. Review Every Item on Your Record
Go through the record line by line and match each listed item with the equipment you physically have.
- Confirm the item is present.
- Check the required quantity.
- Keep related components together.
- Separate items that require turn-in from anything your current instructions allow you to retain.
- Flag anything missing, damaged, or incomplete before your CIF appointment.
If your local CIF provides specific turn-in instructions, follow those instructions even when they differ from general advice online.
2. Lay Out Gear by Category
Organizing your gear into simple groups makes the cleaning and inspection process easier.
- Packs and bags: rucksacks, assault packs, duffel bags, and similar fabric items
- Pouches and load-carrying gear: removable fabric pouches, straps, and webbing
- Sleep-system gear: machine-washable sleeping bags or approved fabric components
- Weather gear: washable wet-weather or cold-weather components
- Protective gear: fabric shells and removable components that require special care
- Uniform or field clothing: washable garments that appear on your applicable records
This is a category checklist, not a replacement for your official clothing record.
CIF Cleaning Checklist Before Turn-In
Once your inventory is organized, work through the cleaning preparation separately. Army CIF procedures vary by installation, but issued equipment is generally expected to be returned clean and serviceable, and some installations specifically require it to be dry.
1. Empty Every Pocket and Compartment
Check every zipper, pouch, sleeve, pocket, and internal compartment before cleaning.
Remove personal belongings and anything that should not enter laundry equipment, including:
- Documents and identification cards
- Keys and personal items
- Batteries and electronics
- Lights, cables, and electronic accessories
- Hydration reservoirs and drinking tubes
- Ammunition, brass, chem lights, and field debris
- Weapons or weapons-related accessories
2. Remove Non-Washable Components
Do not assume that an entire piece of military gear can go into a washer simply because part of it is fabric.
Depending on the item and its care instructions, you may need to remove:
- Hard armor plates
- Soft armor inserts
- Electronic components
- Hydration systems
- Removable rigid frames or supports
- Other components specifically excluded by the item’s care instructions
Do not dismantle permanent components or modify issued equipment just to make it easier to wash.
3. Check the Care Label
Military gear is made from many different fabrics, coatings, hardware, and protective materials. Cleaning requirements can differ significantly from one item to another.
Before machine washing anything:
- Read the care label.
- Check whether machine washing is permitted.
- Check the recommended water temperature.
- Check the permitted drying method.
- Look for restrictions on bleach or other cleaning products.
If the label says an item should not be machine washed, do not put it into a commercial washer simply to speed up the cleaning process.
4. Inspect the Gear Before Washing
Cleaning is a good time to identify problems that may need attention before turn-in.
Look for:
- Torn fabric
- Loose stitching
- Damaged straps
- Broken buckles or fasteners
- Missing components
- Permanent markings
- Heavy mud or embedded debris
- Oil, grease, or persistent stains
- Mildew or trapped moisture
Cleaning cannot repair damaged or missing equipment, so address accountability or condition issues separately.
5. Clean Only Gear Suitable for Machine Washing
For machine-washable fabric items, choose a washer large enough for the gear to move freely without being packed tightly into the drum.
Heavy rucksacks, bags, sleeping gear, and other bulky fabric equipment may need more room than a typical household washer provides.
Always follow the item’s care instructions for detergent, cycle, and water temperature rather than using one cleaning method for every piece of TA-50.
6. Rinse Thoroughly
Straps, padding, webbing, and thick fabric can retain detergent. Make sure washable equipment is rinsed thoroughly and does not feel soapy or contain visible detergent residue after the cycle.
7. Dry the Gear Completely
Do not pack or store cleaned field gear while it is still damp.
Follow the care label for drying instructions. Thick straps, padded sections, seams, and enclosed areas may take longer to dry than the outer surface.
Before packing the item away, inspect it carefully and confirm that hidden areas are also dry.
8. Reassemble and Recheck Your Inventory
After cleaning and drying:
- Return approved removable components to the correct item.
- Check pockets and compartments again.
- Match every item against your clothing record.
- Confirm required components are present.
- Keep related parts together.
- Separate any item that still needs repair, replacement, or clarification.
Quick TA-50 CIF Turn-In Checklist
Use this short checklist before your appointment:
- ☐ Review your current clothing record.
- ☐ Locate every required OCIE item.
- ☐ Confirm required quantities and components.
- ☐ Empty every pocket and compartment.
- ☐ Remove armor, electronics, hydration components, and other non-washable items where required.
- ☐ Read each item’s care label.
- ☐ Separate machine-washable gear from items requiring different care.
- ☐ Remove loose dirt and debris.
- ☐ Clean eligible fabric gear appropriately.
- ☐ Rinse away detergent residue.
- ☐ Dry gear completely according to its care instructions.
- ☐ Inspect straps, buckles, stitching, and components.
- ☐ Reassemble removable components correctly.
- ☐ Compare the final layout with your clothing record again.
- ☐ Follow any additional instructions from your local CIF.
What Should You Not Put in a Commercial Washer?
A commercial washer provides more capacity, but it does not make non-washable equipment safe to machine wash.
Do not put hard armor, electronics, batteries, weapons-related items, hydration reservoirs, or other components prohibited by the manufacturer’s or Army care instructions into a laundry machine.
When you are unsure whether an item is washable, stop and check the item’s label or current official guidance before cleaning it.
TA-50 Cleaning Before CIF Near Fort Campbell
If you are stationed near Fort Campbell and do not want to spend hours washing eligible fabric gear yourself, The Dutchman’s Laundry offers TA-50 and CIF gear cleaning in Clarksville.
Our service is intended for approved, machine-washable, fabric-based military gear. Items are reviewed before cleaning, and non-washable components must be removed.
- Location: 551 Dover Rd, Clarksville, TN 37042
- Standard turnaround: Approximately 24–48 hours
- Typical order range: Approximately $20–$60 depending on quantity, size, condition, and care requirements
- Drop-off hours: Daily, 8 AM–6 PM
- Appointment: No appointment required
CIF inspectors make the final acceptance decision. Laundry service can help with cleaning eligible gear, but it cannot guarantee that an item will be accepted during turn-in.
If cost is your main concern, see our guide to cost-effective TA-50 gear cleaning.
For ACU and OCP uniforms specifically, use our separate guide on how to wash Army ACU and OCP uniforms.
TA-50 Gear List and Cleaning FAQs
What does TA-50 mean in the Army?
TA-50 is an older and still commonly used term for Army-issued field gear. Current Army sources generally refer to issued organizational clothing and equipment as OCIE.
Is there one standard Army TA-50 list?
No single online list should replace your current clothing record. Equipment can differ based on issue history, assignment, location, and Army requirements. Use your current record to determine exactly what you are responsible for.
Does TA-50 have to be clean before CIF turn-in?
Army CIF guidance generally requires returned OCIE to be clean and serviceable, while specific requirements can vary by installation and item. Always check your current local CIF instructions before your appointment.
Does TA-50 need to be dry before turn-in?
Some Army CIF guidance explicitly requires returned equipment to be clean, serviceable, and dry. Even when the wording of local instructions differs, fully drying washable gear before storage or turn-in helps prevent trapped moisture and mildew.
Can I put all TA-50 gear in a washing machine?
No. Some fabric-based equipment may be machine washable, while armor, electronics, rigid components, coated materials, and other specialized equipment may require different care. Follow the item’s care label and official instructions.
What should I remove before washing TA-50?
Empty all pockets and remove non-washable components such as hard armor, soft armor inserts, electronics, batteries, hydration reservoirs, personal belongings, and other items that should not enter a washer. The exact preparation depends on the gear and its care instructions.
Can The Dutchman’s Laundry guarantee my gear will pass CIF?
No. We can clean approved, machine-washable fabric gear, but the CIF inspector makes the final decision about acceptance.
Where can I get TA-50 gear cleaned near Fort Campbell?
The Dutchman’s Laundry provides TA-50 and CIF gear cleaning at 551 Dover Rd in Clarksville, TN. Drop-off hours are daily from 8 AM–6 PM, and no appointment is required.
Final Check Before CIF
The most useful TA-50 checklist is your own current clothing record. Use it to account for every issued item, then clean only the equipment that can be safely cleaned according to its care instructions.
Remove non-washable components, empty every compartment, clean eligible fabric gear, allow everything to dry completely, reassemble the required components, and compare the finished layout against your record one final time.
If you need help cleaning eligible TA-50 or OCIE near Fort Campbell, visit our TA-50 gear cleaning service in Clarksville.